Hdsp 9652 ardour won't start

bowalk6 · October 4, 2020, 9:54pm

Trying my 9652 on ardour again. the card is recognized by alsa mixer. running latest avlinux.
Card works fine in win 10. here is lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
Subsystem: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities:
Kernel driver in use: ivb_uncore
Kernel modules: ie31200_edac

00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f6000000-f70fffff
Prefetchable memory behind bridge: 00000000e8000000-00000000f1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities:
Kernel driver in use: pcieport

00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI])
Subsystem: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 30
Region 0: Memory at f7320000 (64-bit, non-prefetchable) [size=64K]
Capabilities:
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci

00:16.0 Communication controller: Intel Corporation 7 Series/C216 Chipset Family MEI Controller #1 (rev 04)
Subsystem: Intel Corporation 7 Series/C216 Chipset Family MEI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 33
Region 0: Memory at f7337000 (64-bit, non-prefetchable) [size=16]
Capabilities:
Kernel driver in use: mei_me
Kernel modules: mei_me

00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network Connection (rev 04)
Subsystem: Intel Corporation 82579V Gigabit Network Connection
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f7300000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f7335000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f040 [size=32]
Capabilities:
Kernel driver in use: e1000e
Kernel modules: e1000e

00:1a.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
Subsystem: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7334000 (32-bit, non-prefetchable) [size=1K]
Capabilities:
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci

00:1c.0 PCI bridge: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities:
Kernel driver in use: pcieport

00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 26
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
Memory behind bridge: f7200000-f72fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities:
Kernel driver in use: pcieport

00:1c.7 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 8 (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 27
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7100000-f71fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities:
Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
Subsystem: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7333000 (32-bit, non-prefetchable) [size=1K]
Capabilities:
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci

00:1f.0 ISA bridge: Intel Corporation Z77 Express Chipset LPC Controller (rev 04)
Subsystem: Intel Corporation Z77 Express Chipset LPC Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0
Capabilities:
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich

00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 29
Region 0: I/O ports at f090 [size=8]
Region 1: I/O ports at f080 [size=4]
Region 2: I/O ports at f070 [size=8]
Region 3: I/O ports at f060 [size=4]
Region 4: I/O ports at f020 [size=32]
Region 5: Memory at f7332000 (32-bit, non-prefetchable) [size=2K]
Capabilities:
Kernel driver in use: ahci
Kernel modules: ahci

00:1f.3 SMBus: Intel Corporation 7 Series/C216 Chipset Family SMBus Controller (rev 04)
Subsystem: Intel Corporation 7 Series/C216 Chipset Family SMBus Controller
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7331000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f000 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801

01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 630] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ZOTAC International (MCO) Ltd. GF108 [GeForce GT 630]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 31
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e8000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at e000 [size=128]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities:
Kernel driver in use: nouveau
Kernel modules: nouveau

01:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)
Subsystem: ZOTAC International (MCO) Ltd. GF108 High Definition Audio Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f7080000 (32-bit, non-prefetchable) [size=16K]
Capabilities:
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel

03:00.0 PCI bridge: Integrated Technology Express, Inc. IT8892E PCIe to PCI Bridge (rev 30) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Bus: primary=03, secondary=04, subordinate=04, sec-latency=64
Memory behind bridge: f7200000-f72fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities:

04:00.0 Multimedia audio controller: Xilinx Corporation RME Hammerfall DSP (rev 6b)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 255
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7200000 (32-bit, non-prefetchable) [size=64K]
Kernel driver in use: snd_hdsp
Kernel modules: snd_hdsp

05:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 11) (prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation 88SE9172 SATA 6Gb/s Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 32
Region 0: I/O ports at d040 [size=8]
Region 1: I/O ports at d030 [size=4]
Region 2: I/O ports at d020 [size=8]
Region 3: I/O ports at d010 [size=4]
Region 4: I/O ports at d000 [size=16]
Region 5: Memory at f7120000 (32-bit, non-prefetchable) [size=512]
Expansion ROM at f7100000 [disabled] [size=128K]
Capabilities:
Kernel driver in use: ahci
Kernel modules: ahci

paul · October 5, 2020, 12:21am

I don’t want to be too harsh, but that’s a few pages of information that is of no use whatsoever.

You’ve said nothing about:

the error
the version of Ardour
which audio/MIDI backend you are using in Ardour

These are all much more important significant than the output of lspci.

bowalk6 · October 5, 2020, 1:36am

Sorry for the wrong info error is failed to start audio engine with alsa backend version 5.12

paul · October 5, 2020, 1:53am

(1) 5.12 is old at this point. Current release is 6.3
(2) Start it from a terminal window and paste the output that this generates.

bowalk6 · October 5, 2020, 2:12am

here is the output
Fontconfig warning: line 5: unknown element “its:rules”
Fontconfig warning: line 6: unknown element “its:translateRule”
Fontconfig error: line 6: invalid attribute ‘translate’
Fontconfig error: line 6: invalid attribute ‘selector’
Fontconfig error: line 7: invalid attribute ‘xmlns:its’
Fontconfig error: line 7: invalid attribute ‘version’
Fontconfig warning: line 9: unknown element “description”
Fontconfig warning: “/etc/fonts/conf.d/10-hinting-slight.conf”, line 4: unknown element “its:rules”
Fontconfig warning: “/etc/fonts/conf.d/10-hinting-slight.conf”, line 5: unknown element “its:translateRule”
Fontconfig error: “/etc/fonts/conf.d/10-hinting-slight.conf”, line 5: invalid attribute ‘translate’
Fontconfig error: “/etc/fonts/conf.d/10-hinting-slight.conf”, line 5: invalid attribute ‘selector’
Fontconfig error: “/etc/fonts/conf.d/10-hinting-slight.conf”, line 6: invalid attribute ‘xmlns:its’
Fontconfig error: “/etc/fonts/conf.d/10-hinting-slight.conf”, line 6: invalid attribute ‘version’
Fontconfig warning: “/etc/fonts/conf.d/10-hinting-slight.conf”, line 8: unknown element “description”
Fontconfig warning: “/etc/fonts/conf.d/10-scale-bitmap-fonts.conf”, line 4: unknown element “its:rules”
Fontconfig warning: “/etc/fonts/conf.d/10-scale-bitmap-fonts.conf”, line 5: unknown element “its:translateRule”
Fontconfig error: “/etc/fonts/conf.d/10-scale-bitmap-fonts.conf”, line 5: invalid attribute ‘translate’
Fontconfig error: “/etc/fonts/conf.d/10-scale-bitmap-fonts.conf”, line 5: invalid attribute ‘selector’
Fontconfig error: “/etc/fonts/conf.d/10-scale-bitmap-fonts.conf”, line 6: invalid attribute ‘xmlns:its’
Fontconfig error: “/etc/fonts/conf.d/10-scale-bitmap-fonts.conf”, line 6: invalid attribute ‘version’
Fontconfig warning: “/etc/fonts/conf.d/10-scale-bitmap-fonts.conf”, line 8: unknown element “description”
Fontconfig warning: “/etc/fonts/conf.d/11-lcdfilter-default.conf”, line 4: unknown element “its:rules”
Fontconfig warning: “/etc/fonts/conf.d/11-lcdfilter-default.conf”, line 5: unknown element “its:translateRule”
Fontconfig error: “/etc/fonts/conf.d/11-lcdfilter-default.conf”, line 5: invalid attribute ‘translate’
Fontconfig error: “/etc/fonts/conf.d/11-lcdfilter-default.conf”, line 5: invalid attribute ‘selector’
Fontconfig error: “/etc/fonts/conf.d/11-lcdfilter-default.conf”, line 6: invalid attribute ‘xmlns:its’
Fontconfig error: “/etc/fonts/conf.d/11-lcdfilter-default.conf”, line 6: invalid attribute ‘version’
Fontconfig warning: “/etc/fonts/conf.d/11-lcdfilter-default.conf”, line 8: unknown element “description”
Fontconfig warning: “/etc/fonts/conf.d/20-unhint-small-vera.conf”, line 4: unknown element “its:rules”
Fontconfig warning: “/etc/fonts/conf.d/20-unhint-small-vera.conf”, line 5: unknown element “its:translateRule”
Fontconfig error: “/etc/fonts/conf.d/20-unhint-small-vera.conf”, line 5: invalid attribute ‘translate’
Fontconfig error: “/etc/fonts/conf.d/20-unhint-small-vera.conf”, line 5: invalid attribute ‘selector’
Fontconfig error: “/etc/fonts/conf.d/20-unhint-small-vera.conf”, line 6: invalid attribute ‘xmlns:its’
Fontconfig error: “/etc/fonts/conf.d/20-unhint-small-vera.conf”, line 6: invalid attribute ‘version’
Fontconfig warning: “/etc/fonts/conf.d/20-unhint-small-vera.conf”, line 8: unknown element “description”
Fontconfig warning: “/etc/fonts/conf.d/30-metric-aliases.conf”, line 4: unknown element “its:rules”
Fontconfig warning: “/etc/fonts/conf.d/30-metric-aliases.conf”, line 5: unknown element “its:translateRule”
Fontconfig error: “/etc/fonts/conf.d/30-metric-aliases.conf”, line 5: invalid attribute ‘translate’
Fontconfig error: “/etc/fonts/conf.d/30-metric-aliases.conf”, line 5: invalid attribute ‘selector’
Fontconfig error: “/etc/fonts/conf.d/30-metric-aliases.conf”, line 6: invalid attribute ‘xmlns:its’
Fontconfig error: “/etc/fonts/conf.d/30-metric-aliases.conf”, line 6: invalid attribute ‘version’
Fontconfig warning: “/etc/fonts/conf.d/30-metric-aliases.conf”, line 8: unknown element “description”
Fontconfig warning: “/etc/fonts/conf.d/40-nonlatin.conf”, line 4: unknown element “its:rules”
Fontconfig warning: “/etc/fonts/conf.d/40-nonlatin.conf”, line 5: unknown element “its:translateRule”
Fontconfig error: “/etc/fonts/conf.d/40-nonlatin.conf”, line 5: invalid attribute ‘translate’
Fontconfig error: “/etc/fonts/conf.d/40-nonlatin.conf”, line 5: invalid attribute ‘selector’
Fontconfig error: “/etc/fonts/conf.d/40-nonlatin.conf”, line 6: invalid attribute ‘xmlns:its’
Fontconfig error: “/etc/fonts/conf.d/40-nonlatin.conf”, line 6: invalid attribute ‘version’
Fontconfig warning: “/etc/fonts/conf.d/40-nonlatin.conf”, line 8: unknown element “description”
Fontconfig warning: “/etc/fonts/conf.d/45-generic.conf”, line 4: unknown element “its:rules”
Fontconfig warning: “/etc/fonts/conf.d/45-generic.conf”, line 5: unknown element “its:translateRule”
Fontconfig error: “/etc/fonts/conf.d/45-generic.conf”, line 5: invalid attribute ‘translate’
Fontconfig error: “/etc/fonts/conf.d/45-generic.conf”, line 5: invalid attribute ‘selector’
Fontconfig error: “/etc/fonts/conf.d/45-generic.conf”, line 6: invalid attribute ‘xmlns:its’
Fontconfig error: “/etc/fonts/conf.d/45-generic.conf”, line 6: invalid attribute ‘version’
Fontconfig warning: “/etc/fonts/conf.d/45-generic.conf”, line 8: unknown element “description”
Fontconfig warning: “/etc/fonts/conf.d/45-latin.conf”, line 4: unknown element “its:rules”
Fontconfig warning: “/etc/fonts/conf.d/45-latin.conf”, line 5: unknown element “its:translateRule”
Fontconfig error: “/etc/fonts/conf.d/45-latin.conf”, line 5: invalid attribute ‘translate’
Fontconfig error: “/etc/fonts/conf.d/45-latin.conf”, line 5: invalid attribute ‘selector’
Fontconfig error: “/etc/fonts/conf.d/45-latin.conf”, line 6: invalid attribute ‘xmlns:its’
Fontconfig error: “/etc/fonts/conf.d/45-latin.conf”, line 6: invalid attribute ‘version’
Fontconfig warning: “/etc/fonts/conf.d/45-latin.conf”, line 8: unknown element “description”
Fontconfig warning: “/etc/fonts/conf.d/49-sansserif.conf”, line 4: unknown element “its:rules”
Fontconfig warning: “/etc/fonts/conf.d/49-sansserif.conf”, line 5: unknown element “its:translateRule”
Fontconfig error: “/etc/fonts/conf.d/49-sansserif.conf”, line 5: invalid attribute ‘translate’
Fontconfig error: “/etc/fonts/conf.d/49-sansserif.conf”, line 5: invalid attribute ‘selector’
Fontconfig error: “/etc/fonts/conf.d/49-sansserif.conf”, line 6: invalid attribute ‘xmlns:its’
Fontconfig error: “/etc/fonts/conf.d/49-sansserif.conf”, line 6: invalid attribute ‘version’
Fontconfig warning: “/etc/fonts/conf.d/49-sansserif.conf”, line 8: unknown element “description”
Fontconfig warning: “/etc/fonts/conf.d/50-user.conf”, line 4: unknown element “its:rules”
Fontconfig warning: “/etc/fonts/conf.d/50-user.conf”, line 5: unknown element “its:translateRule”
Fontconfig error: “/etc/fonts/conf.d/50-user.conf”, line 5: invalid attribute ‘translate’
Fontconfig error: “/etc/fonts/conf.d/50-user.conf”, line 5: invalid attribute ‘selector’
Fontconfig error: “/etc/fonts/conf.d/50-user.conf”, line 6: invalid attribute ‘xmlns:its’
Fontconfig error: “/etc/fonts/conf.d/50-user.conf”, line 6: invalid attribute ‘version’
Fontconfig warning: “/etc/fonts/conf.d/50-user.conf”, line 8: unknown element “description”
Fontconfig warning: “/etc/fonts/conf.d/51-local.conf”, line 4: unknown element “its:rules”
Fontconfig warning: “/etc/fonts/conf.d/51-local.conf”, line 5: unknown element “its:translateRule”
Fontconfig error: “/etc/fonts/conf.d/51-local.conf”, line 5: invalid attribute ‘translate’
Fontconfig error: “/etc/fonts/conf.d/51-local.conf”, line 5: invalid attribute ‘selector’
Fontconfig error: “/etc/fonts/conf.d/51-local.conf”, line 6: invalid attribute ‘xmlns:its’
Fontconfig error: “/etc/fonts/conf.d/51-local.conf”, line 6: invalid attribute ‘version’
Fontconfig warning: “/etc/fonts/conf.d/51-local.conf”, line 8: unknown element “description”
Fontconfig warning: “/etc/fonts/conf.d/60-generic.conf”, line 4: unknown element “its:rules”
Fontconfig warning: “/etc/fonts/conf.d/60-generic.conf”, line 5: unknown element “its:translateRule”
Fontconfig error: “/etc/fonts/conf.d/60-generic.conf”, line 5: invalid attribute ‘translate’
Fontconfig error: “/etc/fonts/conf.d/60-generic.conf”, line 5: invalid attribute ‘selector’
Fontconfig error: “/etc/fonts/conf.d/60-generic.conf”, line 6: invalid attribute ‘xmlns:its’
Fontconfig error: “/etc/fonts/conf.d/60-generic.conf”, line 6: invalid attribute ‘version’
Fontconfig warning: “/etc/fonts/conf.d/60-generic.conf”, line 8: unknown element “description”
Fontconfig warning: “/etc/fonts/conf.d/60-latin.conf”, line 4: unknown element “its:rules”
Fontconfig warning: “/etc/fonts/conf.d/60-latin.conf”, line 5: unknown element “its:translateRule”
Fontconfig error: “/etc/fonts/conf.d/60-latin.conf”, line 5: invalid attribute ‘translate’
Fontconfig error: “/etc/fonts/conf.d/60-latin.conf”, line 5: invalid attribute ‘selector’
Fontconfig error: “/etc/fonts/conf.d/60-latin.conf”, line 6: invalid attribute ‘xmlns:its’
Fontconfig error: “/etc/fonts/conf.d/60-latin.conf”, line 6: invalid attribute ‘version’
Fontconfig warning: “/etc/fonts/conf.d/60-latin.conf”, line 8: unknown element “description”
Fontconfig warning: “/etc/fonts/conf.d/65-fonts-persian.conf”, line 34: unknown element “its:rules”
Fontconfig warning: “/etc/fonts/conf.d/65-fonts-persian.conf”, line 35: unknown element “its:translateRule”
Fontconfig error: “/etc/fonts/conf.d/65-fonts-persian.conf”, line 35: invalid attribute ‘translate’
Fontconfig error: “/etc/fonts/conf.d/65-fonts-persian.conf”, line 35: invalid attribute ‘selector’
Fontconfig error: “/etc/fonts/conf.d/65-fonts-persian.conf”, line 36: invalid attribute ‘xmlns:its’
Fontconfig error: “/etc/fonts/conf.d/65-fonts-persian.conf”, line 36: invalid attribute ‘version’
Fontconfig warning: “/etc/fonts/conf.d/65-nonlatin.conf”, line 4: unknown element “its:rules”
Fontconfig warning: “/etc/fonts/conf.d/65-nonlatin.conf”, line 5: unknown element “its:translateRule”
Fontconfig error: “/etc/fonts/conf.d/65-nonlatin.conf”, line 5: invalid attribute ‘translate’
Fontconfig error: “/etc/fonts/conf.d/65-nonlatin.conf”, line 5: invalid attribute ‘selector’
Fontconfig error: “/etc/fonts/conf.d/65-nonlatin.conf”, line 6: invalid attribute ‘xmlns:its’
Fontconfig error: “/etc/fonts/conf.d/65-nonlatin.conf”, line 6: invalid attribute ‘version’
Fontconfig warning: “/etc/fonts/conf.d/65-nonlatin.conf”, line 8: unknown element “description”
Fontconfig warning: “/etc/fonts/conf.d/69-unifont.conf”, line 4: unknown element “its:rules”
Fontconfig warning: “/etc/fonts/conf.d/69-unifont.conf”, line 5: unknown element “its:translateRule”
Fontconfig error: “/etc/fonts/conf.d/69-unifont.conf”, line 5: invalid attribute ‘translate’
Fontconfig error: “/etc/fonts/conf.d/69-unifont.conf”, line 5: invalid attribute ‘selector’
Fontconfig error: “/etc/fonts/conf.d/69-unifont.conf”, line 6: invalid attribute ‘xmlns:its’
Fontconfig error: “/etc/fonts/conf.d/69-unifont.conf”, line 6: invalid attribute ‘version’
Fontconfig warning: “/etc/fonts/conf.d/80-delicious.conf”, line 4: unknown element “its:rules”
Fontconfig warning: “/etc/fonts/conf.d/80-delicious.conf”, line 5: unknown element “its:translateRule”
Fontconfig error: “/etc/fonts/conf.d/80-delicious.conf”, line 5: invalid attribute ‘translate’
Fontconfig error: “/etc/fonts/conf.d/80-delicious.conf”, line 5: invalid attribute ‘selector’
Fontconfig error: “/etc/fonts/conf.d/80-delicious.conf”, line 6: invalid attribute ‘xmlns:its’
Fontconfig error: “/etc/fonts/conf.d/80-delicious.conf”, line 6: invalid attribute ‘version’
Fontconfig warning: “/etc/fonts/conf.d/90-synthetic.conf”, line 4: unknown element “its:rules”
Fontconfig warning: “/etc/fonts/conf.d/90-synthetic.conf”, line 5: unknown element “its:translateRule”
Fontconfig error: “/etc/fonts/conf.d/90-synthetic.conf”, line 5: invalid attribute ‘translate’
Fontconfig error: “/etc/fonts/conf.d/90-synthetic.conf”, line 5: invalid attribute ‘selector’
Fontconfig error: “/etc/fonts/conf.d/90-synthetic.conf”, line 6: invalid attribute ‘xmlns:its’
Fontconfig error: “/etc/fonts/conf.d/90-synthetic.conf”, line 6: invalid attribute ‘version’
Fontconfig error: Cannot load default config file
bind txt domain [gtk2_ardour5] to /opt/ardour/share/locale
Ardour5.12.0 (built using 5.12 and GCC version 5.2.1 20150903)
ardour: [INFO]: Your system is configured to limit Ardour to only 1048576 open files
ardour: [INFO]: Loading system configuration file /opt/ardour/etc/system_config
ardour: [INFO]: Loading user configuration file /home/bob/.config/ardour5/config
ardour: [INFO]: CPU vendor: GenuineIntel
ardour: [INFO]: AVX-capable processor
ardour: [INFO]: CPU brand: Intel® Core™ i7-3770K CPU @ 3.50GHz
ardour: [INFO]: Using SSE optimized routines
Cannot xinstall SIGPIPE error handler
ardour: [INFO]: Loading default ui configuration file /opt/ardour/etc/default_ui_config
ardour: [INFO]: Loading user ui configuration file /home/bob/.config/ardour5/ui_config
Color shuttle bg not found
ardour: [INFO]: Loading color file /opt/ardour/share/themes/dark-ardour.colors
ardour: [INFO]: Loading ui configuration file /opt/ardour/etc/clearlooks.rc
ardour: [INFO]: Loading ui configuration file /opt/ardour/etc/clearlooks.rc
Found nothing along /home/bob/.config/ardour5/templates:/opt/ardour/share/templates
run dialog
Scanning folders for bundled LV2s: /opt/ardour/lib/LV2
Set cursor set to default
caught signal - shutting down.
actually writing state to /home/bob/1/1.tmp
renaming state to /home/bob/1/1.ardour
actually writing state to /home/bob/1/1.tmp
renaming state to /home/bob/1/1.ardour
actually writing state to /home/bob/1/1.tmp
renaming state to /home/bob/1/1.ardour

seablade · October 5, 2020, 2:15am

It’s been a while since I ran my PCI RME, but my memory is you need to set the sample rate in hdspconf first, then set Ardour or Jack to use the same sample rate, otherwise it won’t start as it couldn’t set the sample rate. Have you already done this?

   Seablade

bowalk6 · October 5, 2020, 2:19am

Yes i have ardour defaults to 48 and i have it set at 44.1

bowalk6 · October 5, 2020, 2:30am

Just tried again ardour starts but not connected to audio engine

paul · October 5, 2020, 3:56am

All I can offer at this point is to try 6.3 and see if it has the same problem. We’re not really going to put effort into debugging issues with 5.12 …

http://nightly.ardour.org has the absolute most current version, http://ardour.org/download will let you get a free/demo copy to check out.

bowalk6 · October 5, 2020, 4:08am

Thank you will try latest

seablade · October 5, 2020, 11:46am

So obviously you change Ardour to 44.1 then before you hit start?

If hdspconf is finding your device, and presumably hdspmixer is as well, the issue is in your settings. AVLinux usually sets up proper realtime privileges for you, have you confirmed your user is in the audio group? (Not sure if avlinux does this for you or not).

Have you tried starting Jack with the HDSP seperately?

  Seablade

GMaq · October 5, 2020, 1:18pm

Hi,

Sorry I can’t comment specifically on that hardware, I don’t have it to test but indeed a typical AVL install should have the user in the audio group as well as all the usual RT privileges…

seablade · October 5, 2020, 1:27pm

Thanks for the confirmation Glen!

Seablade

system · November 2, 2020, 1:28pm

This topic was automatically closed 28 days after the last reply. New replies are no longer allowed.